You want make your phone clone to another. Here is Solution. First of all we shall go over the basics of what you need to clone a cell phone.
SYSTEM ID
AREA CODE
CELL PHONE NUMBER1) SYSTEM ID
To first start off you must find out the system id for the area that you are In. you can do this in a couple of simple ways:
1)Phone your local cell phone suppyer and say you are programming your cell phone to another number because you are selling it or somthing like that and they will give you a system id number it will consist of a five digit number eg: 16425 which is for the lower mainland for British Columbia.
Another way of finding the sysid is to go through the programming of a phone that is already on a network. (remember each company will have a different system id for that area. so it is easier to clone phones from large companys like BCTEL, TELUS, AT&T, CANTEL, NORTEL etc.
2) AREA CODE
If you dont know the area code that you are in you shouldnt be useing a phone in the first place. but ill give an example anyways. The area code will be a three didgit number eg: 604
3) CELL PHONE NUMBER
this is the number of the cell phone that you want to clone. I am shure that everyone knows what a phone number looks like but i will give an example anyways eg: 438-0000 438=exchang 0000=subscribers number
ok now we get to the good stuff! after you have found all this info you are ready to clone a cell phone. We will go over cloning instructions for popular phones such as:
NOKIA
MOTOROLLA
ERICSSON
*NOTE: MODELS SUCH AS SONY,PANASONIC,AT&T,AUDIOVOX AND UNIDEN WILL NOT BE COVERED IN THIS ISSUE.
1)Programming the NOKIA phone.
since Nokia is one of the most popular phones on the market today (atleast in Canada) we will go over it first.
FOR:NOKIA 21XX,51XX,61XX,636,639,918
Steps
1) Power phone on
2) Press *#639#
3) Enter 10 didgit cellure number, press ok
4) Enter sys id (eg:16425), press ok
5) Phone will automatically turn off than back on
*NOTE-if programmed incorectly display will read “Activation Failed”
FOR:NOKIA P1000/100/PT101/PT128/PT228/PT232
Steps
1)Power phone on
2)Press *3001#12345
3)display reads 00
4)Hold CLR down for few seconds -thEn enter ten didgit phone number, press store,02,store,CLR (hold for few seconds)
5)Enter sys id
6)Press *1*10333*05*05, press store
7)press 03, press store
8)press CLR
9)Power phone off to exit and save programming
FOR:NOKIA 232/239/515
Steps
1)ENter *3001#12345 , press STO 00
2)Press and hold CLR (you will hear 2 beeps)
3)Enter 911#5551212#0 * 12345, STO, 01, STO
4)press and hold CLR (you will hear 2 beeps)
5)Enter local area code plus the cell phone number, press STO, 02, STO
6)press and hold CLR (you will hear 2 beeps)
7)Press *1*1 *333*15*05# 0111 * 1 ,STO, 03, STO
8)press and hold CLR (you will hear 2 beeps)
9)turn phone off than on
2)Programming MOTOROLA phones
Motorola phones all programm the same way
Steps
1)press FCN, press 0000000000000 (13 zeros)
2)Press RCL -phone displays “01″
3)Enter sys ID press **
4)Enter Area COde press **
5)enter cell number press **
6)enter station class mark 05 press **
7)enter acsess overload class (0+2nd lass didgit of cellnumber) Press **
8)enter group id mark 05 press **
9)enter 6 didgit security code 000000 press **
10)enter 3 didgit unlock code 123 press **
11)enter paging channel 0333 press **
12)press*
13)press**NOTE: display should read “01″ if it dose press “SEND”
*NOTE: Press RCL than # to confirm that you have programmed the phone correctly
cellure number should appear.
Programm complete!
3)ERICSSON cell phones
FOR: ERICSSON 318/368/388/618/688
Steps:
1)press 923885, press MENUE key
2)select NAM 1 (push 1)
3)ESN displayed (Press RCL)
4)enter cellur phone number 000-0000, press RCL
5)A-key shows # (press RCL)
6)SID 1 (enter sys id) press RCL
7)ALPHA TAG 1 (leave as is) Press RCL
8)LOCK code 0000, press RCL
9)GO to level 2, press NO
10)EXIT (save)(Press YES)
11)Press MENUE
12)Press 3
13)Press 2
Disclaimer: I don’t take Responsibility for what you do with this script, served for Educational purpose only. …
