Make a GSM SIM Clone using PIC Microcontroller (working and tested)

Make a GSM sim using PIC Microcontroller (working and tested)
( Caution: sim clone is illegal, just for educational purposes only..! ) 
First you want to get IMSI and KI number from your original SIM using SIM Card Reader/Writer <Smart Card Reader> (you can buy or make it, Search in Google then you can find cheap one). If you wish to make your own one, see this step by step tutorial for "Make Simple GSM SIM card Reader / Writer" in my site.
then follow the instructions carefully given below to make your own GSM sim card.

Step 1:
Download SIM-EMU Configurator  here >> SIM_EMU_6.01_CFG_v2.1.zip
Download two hex files "16f877a.hex" and "24c64.hex" file from my download page.

Step 2:
Install and run SIM-EMU Configurator, then go to configure menu. (see figure below)

Sim emu configurator1

figure 1

then click on "Read from disk" and load "16f877a.hex" and then it will ask to load EEPROM file and you can load "24c64.hex" that you already downloaded. after loading two hex files you want to edit IMSI and KI field with you scanned using sim scanner.(if u want you can edit PIN and PUK, defalt values are 1111 and 11111111) see figure2.

Sim emu configurator2
figure 2

Then Save your edited files(click on "Write to disk"). save flash file as "16f877a_my.hex" and EEPROM file as "24c64_my.hex". then you want to write these two files to PIC and EEPROM.

Step 3 :
Use PIC parallel port programmer ( Working and tested ) or other MC programmer and writes "16f877a_my.hex" file to PIC16F877A and writes "24c64_my.hex" file to 24c64 EEPROM(its a very famous and cheap memory chip) one after one.

Step 4 :
Now connect PIC16F877A, 24c64 and sim card adapter. see figure3.

GSM Sim Clone using Microcontroller
figure 3

you have done it..! just connect this gadget with your mobile phone and enjoy. If you have any problem regarding this please comment below, I'll try to solve it. and if you are interested in this work please don't forget to share on facebook. (  just click and share the fb like button top of the page :-)  )
 NOTE: You can write up to 10 different KIs and IMSIs to this gadget. In above Step 2 you can select "Positions" (0 to 9) and enter different KIs and IMSIs. then you can see a new menu in your phone "SIM-EMU Configurator". you can switch between SIMs by entering this menu..

2 Comments
Disqus
Fb Comments
Comments :

2 comments:

  1. Good design.
    to thinking of test on my cpu with gsm modem to see if the 3g internet access.
    lacked the PIC16F877A source to compile in another pic
    18f2xxx type.
    Could you post the source of the pic.
    The idea had to clone and using different times and in different places. use a home use one at work and one in the car use
    like I'm removing the chip gsm cell phone and using the modem or cellular car.
    So an idea but interesting.

    ReplyDelete
  2. Hello everyone I want to introduce you guys to a group a private investigators who can help you with information you need in any situation in life and they are ready to follow you step by step until your case is cleared just contact +17078685071 and you will happily ever after
    Premiumhackservices@gmail.com

    ReplyDelete